User manual
USER MANUAL
Page
25
• Press the M or OK Key. Then a NUC is performed automatically.
• After NUC, all settings are restored to the manufacturer’s default settings.
Analysis Menu
• Press the M Key to bring up the main menu. Press the ▲
and
▼ Keys to highlight
and select the “Analysis” menu.
• You may then select from four-sub menus: Spot, Line, Area and Isotherm.
Spot Sub-Menu
• Spot analysis is only available on saved/captured images.
• Press the M or
► Keys to enter the “Analysis” menu. Press the ▼ Key to highlight
and select the “Spot” sub-menu, then press the M or OK Keys to access the option.
• Five temperature spots are shown on the display screen. Four of these spots are
marked as A, B, C, and D, corresponding spot temperatures are shown respectively