User manual
USER MANUAL
Page
27
• The first point of the line can be positioned by the operator to the desired position by
pressing the ▲
,
▼
,
◄
or
► Keys. Confirm the starting position by pressing the M
Key.
• To position the second point of the line, press the ▲
,
▼
,
◄
or
► Keys in the
same manner as previously described.
• This can be repeated until the line is in the desired position.
• Press the M Key to confirm the location and the selected profile will be displayed on
the image indicating the minimum and maximum temperatures of the line.
• Press the C Key to exit the analysis option for this line.
• Repeat the above procedure to analyze new line selections.
• Press the C Key again to exit and return to the saved image.
Area Sub-menu
• Area analysis is only available on saved images.