User manual

USER MANUAL
Page 34
• Pressing the C Key will exit the sub-menu.
Transferring Files from the Camera to a Computer
• Before transferring files to your computer, confirm that the Operating System of your
computer is Microsoft
®
Windows 2000 or higher and that the USB driver and SPI
Analysis Software
®
are properly installed.
• When there is no menu displayed on the screen, connect the camera and your
computer using the USB extension cable.
• The prompt “USB Mode!” will appear on the display screen.
• Run the SPI Analysis Software
®
. Select the sub-menu RAZ-IR Device under the File
menu and use the Device Manager command to access images from the camera.
Operation Instruction for Video Output
Composite video output (PAL or NTSC mode) option is available with this RAZ-IR
camera. With this option you can view the live image captured by the camera on a
monitor or other recording device. Before using this option, ensure that the RAZ-IR
camera is switched off.
• Properly connect the camera to the monitor (or recording device) with the video
cable supplied with the camera.
• Power on the monitor.
• Power on the camera.
• Enter the “Analysis” sub-menu under the “Setup” menu, then choose the Video
Output option and set its value to “ON”.
• Press the M or OK Keys to save the selection and return to the live image.
• In PAL mode, the live image is displayed on both the camera’s screen and the
monitor (or other recording device); In NTSC mode, the live image is only available
on the monitor (or other recording device).
• When viewing the live image on an external monitor, you can still use the camera
Keys to control the displayed image.