User manual

USER MANUAL
Page 35
• After viewing the live image, power off the camera, the monitor (or other recording
device) and disconnect the cable.
Note:
• Caution - power off the camera before connecting it to a monitor or a
recording device to avoid damaging the camera.
• Until the video output option is selected on the camera, the image quality
displayed on an external monitor may be of poor quality.
Power Alarm
• The power status for the camera is displayed at the top right corner of the outer
screen.
• When power is low, an audible sound alarm will automatically notify the operator
every five minutes. A visual power status indicator is displayed as “ ” on the right
top of the screen to show a low power condition.
Battery Charging
Two methods are available to charge the battery.
• Charging using the external battery charger.
• Charging using the camera’s built-in battery charger.
Charging Using the External Battery Charger
• Insert the battery into the battery charger.
• Plug the charger into a standard electrical wall outlet (96-250VAC).
• The charge lamp (orange) will light and charging will begin.
• When the charge lamp changes to green, charging is completed.
• If a fault condition occurs during charging, the charge lamp will change to red.
• Once the battery is fully charged it can be used with the camera.
• The approximate charge time is 300 minutes for normal charge and 360 minutes for a
full charge.
Charging Using the Built-in Battery Charger
• Connect the 5VDC plug of the AC adapter to the converter supplied with the AC
adapter.
• Insert the USB plug of the converter into the USB interface of the camera.