User manual

USER MANUAL

Page

• Connect the AC adapter plug to a standard electrical wall outlet (96-250VAC).

• When charging begins the white indicator light on the outer screen of the camera will

blink.

• When the white indicator light stops blinking, the battery is fully charged.

• The approximate charge time is 360 minutes for a normal charge and 420 minutes for

a full charge.

Note:

 When charging the battery using the built in battery charger, the camera’s

Power switch is disabled.

 Charging time may vary based on the battery’s general physical condition

and the environmental temperature in the charging area.

 It is normal for the battery and the charger to feel warm during the charging

process.

Additional Information

• Batteries should only be charged when ambient temperatures are between 0 and

+45 .

• Never expose the battery to fire or open flames or try to heat the battery by any

means.

• Be sure to insert the battery properly with the terminals connected to the correct

polarity.

• Do not short circuit the battery by allowing any metal or other conductive object or

material to come into contact with the battery’s terminals.

• Do not expose the battery to direct sunlight for long periods of time or leave the

battery in a hot environment.

• Always remove the battery from the camera or charger when not in use. Store the

battery in a cool, dry place.

• All rechargeable batteries gradually lose their charge over time when they are left in

storage. If the battery is to be left in storage for a period time and not used, the

battery should be charged before use.

• Do not use the battery if it is abnormally hot to the touch, leaks any fluid, emits an

odor or shows signs of physical distortion to its exterior surfaces, such as bulges.

• In the event that battery acid comes into contact with you skin or eyes which may

cause a severe burn, immediately flush the area with ample amounts of fresh water