SDS1000X-E Series
SDS1000X-E Series Digital Oscilloscope Key Features 200 MHz bandwidth model Real-time sampling rate up to 1 GSa/s The newest generation of SPO technology •Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode) •Supports 256-level intensity grading and color display modes •Record length up to 14 Mpts Product overview •Digital trigger system Intelligent triggers: Edge, Slope, Pulse Width, Window, SIGLENT’s new SDS1000X-E Series Super Phosphor Runt, Interval, Time out (D
SDS1000X-E Series Digital Oscilloscope Model SDS1202X-E Bandwidth 200 MHz Sampling Rate (Max.) 1 GSa/s Channels 2+EXT Memory Depth (Max.) 7 Mpts/CH (Dual-Channel); 14 Mpts/CH (Single-Channel) Waveform Capture Rate (Max.
SDS1000X-E Series Digital Oscilloscope Functions & Characteristics Record Length of Up to 14 Mpts Waveform Capture Rate Up to 400,000 wfm/s Using hardware-based Zoom technologies and a record length of up to With a waveform capture rate of up to 400,000 wfm/s (sequence mode), 14 Mpts, users are able to use a higher sampling rate to capture more of the oscilloscope can easily capture the unusual or low-probability events. the signal and then quickly zoom in to focus on the area of interest.
SDS1000X-E Series Digital Oscilloscope History Waveforms (History) Mode and Gate and Zoom Measurement Segmented Acquisition (Sequence) Playback the latest triggered events using the history function. Through Gate and Zoom measurement, the user can specify an arbitrary Segmented memory zcquisition will store the waveform into multiple interval of waveform data analysis and statistics.
SDS1000X-E Series Digital Oscilloscope Acquire System Sampling Rate 1 GSa/s (Single - Channel), 500 MSa/s (Dual - Channel) Memory Depth Max 14 Mpts/Ch (Single - Channel , 7 Mpts/Ch (Dual - Channel) Peak Detect 1 nsec Average Averages: 4, 16, 32, 64, 128, 256, 512, 1024 Eres Enhance bits: 0.5, 1.5, 2, 2.5, 3; Selectable Waveform interpolation Sinx/x, Linear Input Channels 2 Analog Coupling DC, AC, GND Impedance Max. Input voltage CH to CH Isolation DC~ Max BW >40 dB Probe attenuator 0.
SDS1000X-E Series Digital Oscilloscope Horizontal System Timebase Scale 1.0 ns/div - 100 s/div Channel Skew Waveform Capture Rate Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) Intensity grading 256 Levels Display Format Y-T X-Y Roll Timebase Accuracy Roll Mode 50 ms/div - 100 s/div (1-2-5 step) Trigger System Trigger Mode Auto, Normal, Single Trigger Level Holdoff Range 80 ns - 1.
SDS1000X-E Series Digital Oscilloscope Pulse Trigger Polarity Limit Range +wid , -wid , , Source CH1 / CH2 Pulse Range 2 ns - 4.2 s Resolution 1 ns , Video Trigger Signal Standard NTSC PAL 720p/50 1080i/60 Custom Source CH1 / CH2 Sync Any, Select Trigger condition Line, Field Window Trigger Window Type Absolute, Relative Source CH1 / CH2 Interval Trigger Slope Limit Range Rising, Falling , , Source CH1/CH2 Time Range 2 ns - 4.
SDS1000X-E Series Digital Oscilloscope Serial Trigger I2C Trigger Condition Start, Stop, Restart, No Ack, EEPROM, 7 bits Address & Data, 10 bits Address & Data, Data Length Source (SDA/SCL) CH1, CH2 Data format Hex Limit Range Data Length EEPROM: 1 byte Addr & Data: 1 - 2 byte Data Length: 1 - 12 byte R/W bit Addr & Data: Read, Write, Do not care SPI Trigger Condition Data Source (CS/CL/Data) CH1, CH2 Data format Binary Data Length 4 - 96 bit Bit Value 0, 1, X Bit Order LSB, MSB UART/
SDS1000X-E Series Digital Oscilloscope Serial Decoder I2C Decoder Signal SCL, SDA Address 7 bits, 10 bits Threshold -4.5 - 4.5 div List 1 - 7 lines SPI Decoder Signal SCL, MISO, MOSI, CS Edge Select Rising, Falling Idle Level Low, High Bit Order MSB, LSB Threshold -4.5 - 4.5 div List 1 - 7 lines UART/ RS232 Decoder Signal RX, TX Data Width 5 bit 6 bit Parity Check None, Odd, Even Stop Bit 1 bit, 1.5 bit, 2 bit Idle Level Low, High Threshold -4.5 - 4.
SDS1000X-E Series Digital Oscilloscope Measurement Source CH1, CH2, Math, Ref, History Number of Measurements Display 5 measurements at the same time Measurement Range Screen region, Gate region Measurement Parameters ( 38 Types ) Max Highest value in input waveform Min Lowest value in input waveform Pk-Pk Difference between maximum and minimum data values Ampl Difference between top and base in a bimodal signal, or between max and min in an unimodal signal Top Value of most probable higher s
SDS1000X-E Series Digital Oscilloscope Math Function Operation FFT window Rectangular, Blackman, Hanning, Hamming FFT display Full Screen, Split Number of Decoders 2 I/O Standard USB Host, USB Device, LAN, Pass/Fail, Trigger Out Pass/Fail 3.
SDS1000X-E Series Digital Oscilloscope Probes and Accessories Probe Picture Model Description Bandwidth: 70 MHz, 1 X/10 X, 1 M/10 Mohm, 300 V/600 V Passive Bandwidth: 100 MHz, 1 X/10 X, 1 M/10 Mohm,300 V/600 V Bandwidth: 200 MHz, 1 X/10 X, 1 M/10 Mohm, 300 V/600 V Bandwidth: 100 KHz, Max. continuous current: 20 Arms, Peak current: 60 A CP4020 CP4050 Bandwidth: 1 MHz, Max. continuous current: 50 Arms, Peak current: 140 A Switch Ratio: 500 mV/A, 50 mV/A battery source Bandwidth: 150 KHz, Max.
SDS1000X-E Series Digital Oscilloscope Probe Picture DPB5150 DPB5150A Model Description Bandwidth: 70 MHz, Differential Range: 1500 V (DC + Peak AC), 50 X/500 X Bandwidth: 100 MHz, Differential Range: 1500 V (DC + Peak AC), Differential Probe Bandwidth: 70 MHz, Differential Range: 7000 V (DC + Peak AC), DPB5700 DC 5 V/1 A USB adapter Bandwidth: 100 MHz Differential Range: 7000 V (DC + Peak AC), DPB5700A 100 X/1000 X DC 5 V/1 A USB adapter Bandwidth: 40 MHz High Voltage HPB4010 Differential Ran
SDS1000X-E Series Digital Oscilloscope Ordering information Product Name SDS1000X-E Series Digital Oscilloscope SDS1202X-E 200 MHz Two Channels USB Cable -1 Quick Start -1 Standard Accessories Passive Probe -2 Power Cord -1 CD (Included User Manual and EasyScopeX software)-1 Isolated Front End ISFE STB Demo Source STB-3 High Voltage Probe HPB4010 CP4020/CP4050/CP4070/ Optional Accessories Current Probe CP4070A/CP5030/CP5030A/ CP5150/CP5500 Differential Probe DPB4080/DPB5150/DPB5150A /DPB5700