Specification Sheet

SDS1000X-E Series Digital Oscilloscope
Measurement
Source CH1, CH2, Math, Ref, History
Number of Measurements Display 5 measurements at the same time
Measurement Range Screen region, Gate region
Measurement Parameters ( 38 Types )
Vertical Voltage
Max Highest value in input waveform
Min Lowest value in input waveform
Pk-Pk Difference between maximum and minimum data values
Ampl Difference between top and base in a bimodal signal, or between max and min in an unimodal signal
Top Value of most probable higher state in a bimodal waveform
Base Value of most probable lower state in a bimodal waveform
Mean Average of all data values
Cmean
Stdev Standard deviation of all data values
Cstd
VRMS Root mean square of all data values
Crms
FOV Overshoot after a falling edge; (base-min)/Amplitude
FPRE Overshoot before a falling edge; (max-top)/Amplitude
ROV Overshoot after a rising edge; (max-top)/Amplitude
RPRE Overshoot before a rising edge; (base-min)/Amplitude
Level@X the voltage value of the trigger point
Horizontal Time
Period
Freq
+Wid
-Wid
Rise Time
Fall Time
Bwid
crossing
+Dut Ratio of positive width to period
-Dut Ratio of negative width to period
Delay
Time@Level
Delay Phase Calculate the phase difference between two edges
FRR
FRF
FFR
FFF
LRR
LRF
LFR
LFF
Skew Time of source A edge minus time of nearest source B edge
Cursors
Track: Time X1, X2, (X1-X2)
Statistics Current, Mean, Min, Max, Stdev, Count
Counter Hardware 6 bit counter channels are selectable