Specification Sheet

SDS1000X-E Series Digital Oscilloscope
Product overview
SIGLENT’s new SDS1000X-E Series Super Phosphor
Oscilloscope is available in one bandwidth, 200 MHz. It has
a maximum sample rate of 1 GSa/s and a standard record
length of 14 Mpts. For ease-of-use, the most commonly
used functions can be accessed with its user-friendly front
panel design.
The SDS1000X-E series employs a new generation of SPO
(Super Phosphor Oscilloscope) technology that provides
is also lower than similar products in the industry. It comes
with a minimum vertical input range of 500 uV/div, an
innovative digital trigger system with high sensitivity and
low jitter, and a waveform capture rate of 400,000 frames/
sec (sequence mode). The SDS1000X-E also employs a
256-level intensity grading display function and a color
temperature display mode not found in other models in
this class. Siglent’s latest oscilloscopes offering supports
multiple powerful triggering modes including serial bus
triggering. Decoding is standard configuration including
IIC,SPI,UART,CAN,LIN. History waveform recording and
sequential triggering enable extended waveform recording
and analysis. Another powerful addition is the new 1 million
points FFT math function that gives the SDS1000X-E very
high frequency resolution when observing signal spectra.
The new design also includes a hardware co-processor that
delivers measurements quickly and accurately. The features
and performance of Siglent’s new SDS1000X-E cannot be
matched anywhere else in this price class.
Key Features
200 MHz bandwidth model
Real-time sampling rate up to 1 GSa/s
The newest generation of SPO technology
•Waveform capture rate up to 100,000 wfm/s (normal
mode), and 400,000 wfm/s (sequence mode)
•Supports 256-level intensity grading and color display
modes
•Record length up to 14 Mpts
•Digital trigger system
Intelligent triggers: Edge, Slope, Pulse Width, Window,
Runt, Interval, Time out (Dropout), Pattern
Serial bus triggering and decoding (Standard), supports
IIC, SPI, UART, RS232, CAN, and LIN
Video trigger, supports HDTV
scales
10 types of one-button shortcuts, supports Auto Setup,
Default, Cursors, Measure, Roll, History, Display/Persist,
Clear Sweep, Zoom and Print
Segmented acquisition (Sequence) mode, dividing the
maximum record length into multiple segments (up to
80,000), according to trigger conditions set by the user,
with a very small dead time segment to capture the
qualifying event
History waveform record (History) function, the maximum
recorded waveform length is 80,000 frames
Automatic measurement function for 38 parameters,
supports Statistics, Zoom measurement, Gating
measurement, Math measurement, History measurement
and Ref measurement
1 Mpoints FFT
True measurement and math of all sampled data points (to
14M)
Math functions (FFT, addition, subtraction, multiplication,
division, integration, differential, square root)
Preset key can be customized for user settings or factory
“defaults”
Security Erase mode
High Speed hardware based Pass/Fail function
Large 7 inch TFT-LCD display with 800 * 480 resolution
Multiple interface types: USB Host, USB Device (USB-
TMC), LAN (VXI-11), Pass/Fail, Trigger Out
Supports SCPI remote control commands
Supports Multi-language display and embedded online
help