Specification Sheet

SDS1000X-E Series Digital Oscilloscope
Horizontal System
Timebase Scale 1.0 ns/div - 100 s/div
Channel Skew
Waveform Capture Rate Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Intensity grading 256 Levels
Display Format Y-T X-Y Roll
Timebase Accuracy
Roll Mode 50 ms/div - 100 s/div (1-2-5 step)
Trigger System
Trigger Mode Auto, Normal, Single
Trigger Level
Holdoff Range 80 ns - 1.5 s
Trigger Coupling
AC
DC
LFRJ
HFRJ
Noise RJ (CH1 - CH2)
Coupling Frequency Response
(CH1 CH2)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Blocks the DC component and attenuates the low-frequency
components below 2 MHz
HFRJ: Attenuates the high-frequency components above 1.2 MHz
Coupling Frequency Response
(EXT)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 30 Hz
LFRJ: Blocks the DC component and attenuates the low-frequency
components below 10 KHz
HFRJ: Attenuates the high-frequency components above 500 KHz
Trigger Accuracy (Typical)
Trigger Sensitivity
CH1 - CH2: DC - Max BW 0.6 div
EXT: 200 mVpp DC - 10 MHz
300 mVpp 10 MHz - BW frequency
EXT/5: 1 Vpp DC - 10 MHz
1.5 Vpp 10 MHz - BW frequency
Trigger Jitter
Trigger Displacement
Delay Trigger: 0 to 10,000 div
Edge Trigger
Slope Rising, Falling, Rising & Falling
Source CH1/CH2/EXT/(EXT/5)/AC Line
Slope Trigger
Slope Rising, Falling
Limit Range , , ,
Source CH1/CH2
Time Range 2 ns - 4.2 s
Resolution 1 ns