Indoor Fireplace User Manual

G8860 _4 Installation Manual NZ

13.2 Attach the Rear to the Sides and Base:

The rear panel fits inside the Side and Base

panels, make sure the flanges on the Side

and Base panels are on the outside. The two

holes on the Rear panel go towards the bottom.

13.3 Attach the Top-Rear:

Attach the top-rear panel to the Sides and Rear

panels, with the flanges of the Top-rear panel on

the outside. Do not attach Top-Front panel yet,

this will be done after the flue has been mated

with the fire.

14.0 Fix the Outer Skin Kit (OSK) into the Cavity (IB1100 Only):

Slide the OSK into the cavity, ensuring the gas pipe passes through the grommet at the

back of the OSK and is within 100mm of the front right hand corner. Secure the OSK to the

wall using screws or other fasteners through the slots at the front of the Side panels.