Indoor Fireplace User Manual

G8860 _4 Installation Manual NZ

22.1 IB1100- Locating the Log Set After Replacing the Fire Box:

1) Remove packaging from around log sets

2) Place 2 x rear logs (long rectangular ones) into position by inserting in behind retainer

brackets at rear of fire box.

3) Place front three log sets into position over the top of the main burners. Use the log

template to properly locate the logs. The front edge of each log should be located so that

its front edge is directly behind the holes in the top of each burner which should follow

the contours of the logs.

4) Cover empty spaces around logs with small logs as per 4) & 5) on previous page