Installation Sheet

TEAPOT CENTERSET FAUCET INSTALLATION
Installation
3. Insert the faucet into its prepared mounting holes.
From below, secure the faucet by tightening the
provided lock nuts onto each threaded shank. Hand
tighten firmly. Finish tightening with an adjustable
wrench if desired.
4. Connect the main water supply lines to the threaded
shanks of the faucet. If needed, use the provided cone
washers and lock nuts to make the connections. Apply
thread sealant or plumber’s tape to the threads before
attaching.
1. Ensure that the water supply below your sink is
completely shut off by turning the valve all the way to
the right.
Tip: Place a small bucket below your workspace to
catch any water that may drip during the installation
process.
2. Slide the provided plastic baseplate onto the base
of the faucet to prepare for install.
2Teapot Centerset Faucet Installation Instructions
OFF
COLDHOT