Installation Sheet

3High Tank Pull Chain Water Closet Installation

TRIM KIT AND TANK INSTALLATION

1. Because the trim kit arrives assembled, it is necessary to remove

the wing nuts and metal washers from the bolts on the bottom of

the kit (A2). Insert the bolts through the holes in the back of the

toilet bowl to fasten the trim kit to the top of the toilet bowl. Thread

the washers and wing nuts onto the bolts from underneath the

toilet (A2) and tighten to secure.

2. Remove the decorative nut and washer from the top of the trim kit

(A1).

3. Slide the decorative nut (B1) and tapered washer onto bottom

end of the ush pipe (C1). (The tapered end of the washer should

be facing down.) Insert the ush pipe (C1) into the opening in the

back of the toilet bowl.

4. Remove the nuts and washers from the water closet tank. Slide

the ush pipe nut (B2) and tapered washer onto the top of the

ush pipe (C1).

5. Place the tank (with wall bracket attached) onto the ush pipe (C1)

and place in the desired mounting location. Verify that the tank is

level, and mark the outline of the wall bracket on the wall with a

pencil. We recommend using two people to complete this step.

6. Remove the tank and disconnect the wall bracket. Place the

bracket on the outline created in the previous step and mark the

location of the mounting holes.

7. Drill four mounting holes and fasten the wall bracket to the wall

using the appropriate hardware for the installation type.

8. Secure the water closet tank to the wall bracket with the metal

L-brackets.

9. Make sure that the ush pipe sealing gasket (D2) and decorative

escutcheon (D1) are attached to the bottom of the tank.

10. Attach the ush pipe (C1) to the tank outlet. Tighten the decorative

nuts to secure the ush pipe to the tank and toilet bowl.

11. Slide a tapered washer onto the ared end of the water line pipe

(C2). Slide the nut (B3) onto the bottom end of the water line pipe

and move it up to meet the tapered washer.

12. Use the pipe nipple (E4) to connect the shut off valve (E5) to the

main water supply.

C1 C2

D2D1