Installation Sheet

4High Tank Pull Chain Water Closet Installation

13. Connect the exible water supply tube (E1) to the shut

off valve (E5).

14. Connect the water line pipe (C2) to the exible water

supply tube (E1) with the compression tube tting

(E2).

15. Insert the water line pipe (C2) into the tank and tighten

the nut (B3) to secure. Trim the pipe to the appropriate

length if necessary.

16. In the desired location, install the water line brackets

(F) over the water line pipe to hold the pipe in place

after installation.

17. Connect the chain and ush handle to the brass ush

arm on the top of the tank. Adjust the length of the

chain on the apper as needed.

18. Finish your installation by attaching the toilet seat

according to the included seat installation instructions.