Installation guide
2
Package Contents
• DP FireWire 800 3-Port PCIe board
• "Y" split power cable and spare low profile bracket
• Driver CD
• Quick installation guide
Board Layout
Figure 1: Board Layout
Note: The power connector (same as the one used
with your floppy disk drive) is designed to provide
additional power to the board when needed. This
connection is recommended. We recommend to
connect this power connector when the following
conditions occur:
- All ports are used.
- Device(s) not being detected.
In case you need to connect this power connector,
power off your system first before making this
connection.
FireWire 800
Ports
FireWire 400
Port
Power Connector
(recommended)