TV Mount User Manual

ManualsBrandsSIIG ManualsTV MountL2756

04-0661

Installation Instructions

Wall distance: 1.38" / 35mm

Bubble level included

Low Profile Universal TV Mount - 42" to 70"

IMPORTANT: If you don't understand the installation instructions, please consult an installation

specialist

Fixed Flat-Panel TV Wall Mount

Universal Mounting Pattern

Material: 2.0mm Cold Rolled Steel Plate

TV Size: 42" - 70"

Max load capacity: 165lbs / 75kgs

Summary of content (8 pages)

PAGE 1
Low Profile Universal TV Mount - 42" to 70" Installation Instructions Fixed Flat-Panel TV Wall Mount Material: 2.0mm Cold Rolled Steel Plate TV Size: 42" - 70" Max load capacity: 165lbs / 75kgs Wall distance: 1.
PAGE 2
INSTALLATION AND OPERATING INSTRUCTIONS Caution Prior to the installation of this product, the installation instructions should be read and completely understood. The installation instructions must be read to prevent personal injury and property damage. Keep these installation instructions in an easily accessible location for future reference. CAUTION: The maximum load capacity is 165lbs. Use with products exceeding the maximum load capacity may cause serious injury. See apparatus instructions.
PAGE 3
Tools Required: 1 Phillips head screw driver 2 Stud finder for drywall installation 3 1/2" Socket and Wrench 4 Electric drill, 3/16" (5mm) drill bit for wood stud installation and 3/8" (10mm) masonry bit for concrete/brick installation Note: Please ensure that the bubble level (G2) is properly mounted on the wall plate prior to mounting the wall plate. Step1: Wall Plate Installation A) Wood Stud Installation NOTE: When mounting to wood studs, the two wood studs must be a minimum of 16" apart.
PAGE 4
B) Concrete / Brick Installation NOTE: The concrete anchors must be used for concrete installation. 1 Attach the bubble level (G2) to the wall plate, with the help of an assistant place the wall plate into position against the wall, using the bubble level to keep it level. 2 Mark four holes to be used for securing the mount and place the wall plate aside. 3 Next, drill holes using an electric drill and 3/8" masonry bit to a depth of approximately 2". 4 Insert a concrete anchor (F) into each hole.
PAGE 5
Step 3 Final Installation & Adjustment 1 Hook the TV rails over the top of the wall plate. 2 Then rotate the long screw at the bottom of the display rail to tighten. Maintenance Check the mounting screws every two months for tightness.
PAGE 6
Blank Page 6
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a 5-year manufacturer warranty with this product.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.