User Manual

IntelliKnight 5808 Installation Manual 151274-L8
7-13
A warning screen will display. If you want to proceed with deleting the group, select Yes. To cancel, select
No.
7.4.4 View Group Points
1. Enter the installer code.
2. Select 7 for Program Menu.
3. Press 3 to enter group menu.
4. Press 4 to view group points.
5. Enter the group number, then press
ENTER.
7.4.5 Edit Output Group Templates
Some installations may require that zones be mapped to more than 8 output groups. With output group templates
you can combine one or all output groups into one template, which can be used when the same combination of
outputs are used for several zones.
For example, lets say an installation has five zones (See Table 7-4). The check mark indicates what output groups
are mapped to each zone. You will notice that every zone is mapped to outputs 1 and 2. As an alternative you can
create a template that combines output group 1 and 2 as one choice.
This can be done by creating a template which includes output groups 1 and 2. Then you can map all the zones to
the template you created. This will free up output group assignments that are common to several zones. This is
very useful when you need to map zones to more than eight output groups.
To create Output Group Templates:
1. From the Main Menu, select 7 for Program Menu.
2. From the Program Menu, select 3 for Group.
3. At the next screen, select 5 for Edit OPG Template.
4. Select the template number (01 - 08).
Table 7-4 Zone Group Example
Zone
Group Number
12345678
1st Floor Smoke Detectors X X X
2nd Floor Smoke Detectors X X X
3rd Floor smoke Detectors X X X
Manual Fire Pull Stations X X X
Water Flow Switches X X X