User Manual

Programming 151274-L8
7-20
7.5.3 Point Programming For 5880 and 5865 Modules
To program 5880 or 5865 module points:
1. Enter the installer code.
2. Select 7 for Program Menu.
3. Press 4 to enter point menu.
4. Press the or arrows to select the desired module. Refer to Section 6.5 for available choices. Press
ENTER.
Figure 7-11 Programming Points Screen for 5880 and 5865 Modules
5. Enter the point number. Press
ENTER.
6. Press the or arrows to select the type (Notification or unused). Press
ENTER.
7. Press the or arrows to select the desired Group. Press
ENTER.
8. Edit module name. See Section 7.5.4, or Press to skip module name edit.
9. Repeat Steps 1 through 8 for all points.
7.5.4 Assigning a Name to a Point
You can assign a name to a point to make it easier to recognize on a display.
If you wish to edit the name of a point, follow these instructions:
1. Do steps 1 through 4 of Section 7.5.3.
2. Using the or arrow, select the module of the point you want to edit, press
ENTER.
3. Enter the point number.
4. Press until the module name is blinking. Press
ENTER.
A screen similar to the one shown in Figure 7-12 displays.
Figure 7-12 Selecting Character for Zone Name