User Manual

System Operation 151274-L8
8-2
8.2.1 LCD Displays
The control panel LCD displays system messages, annunciates alarms, supervisories and troubles; provides
status information; and prompts for input. These messages can be up to 80 characters, displaying over four lines
of 20 characters each. Annunciator keys beep when they are pressed.
8.2.2 Banner
The banner is the message that displays on the control panel when the system is in normal mode (no alarm or
trouble condition exists and menus are not in use). You can create a customized message that will display instead
of the internal (default) message. See Section 7.6.7 for information on customizing the banner.
Figure 8-2 Banner Display Examples
8.3 Key Operation
The key on the control panel board assembly is for accessing the User Menu for basic system operation. The key
is activated when it is turned once to the right (clockwise). If the key has been used to activate the menu, it must
be turned counter-clockwise to exit the menu.
Figure 8-3 Using a Key to Access the User Menu