User Manual

IntelliKnight 5808 Installation Manual 151274-L8
8-9
3. If you are using the panel’s internal modem to communicate, you will be prompted to enter a phone number.
If you are communicating via the RS232 connection, a phone number is not needed and this step will be
skipped.
If the phone number you will be calling is already displayed, press
ENTER. Continue with Step 4. If the phone
number you will be calling is not already displayed, enter the number and press
ENTER. A phone number can be
up to 24 digits long and can contain the following special characters.
Use the number buttons on the annunciator or the up- and down-arrow keys to select special characters.
Characters begin displaying after “9”.
4. You will be prompted to enter an account number. If the account number you want to use is already dis-
played, just press
ENTER to begin communication.
If the account number displayed is not the correct one, enter the account number and press
ENTER to begin
communication or view the next screen.
5. If you are using the panel's internal modem to communicate, you will be prompted to select a modem speed.
Press ENTER on a speed to begin communication.
6. The panel will attempt to communicate with the computer. If communication was established, the upload
task you created will be placed on the Downloading Software job queue, awaiting processing. When pro-
cessing is completed, an “Unsolicited Upload” task will appear in the queue.
8.5.20 Working with a Printer
If you are using the Model 5824 serial/parallel printer interface module, several printing options are available.
See Section 4.6 for information about installing the 5824.
1. From the Main Menu, select 5 Printer Options.
2. From the next screen, select the 5824 module where the printer is connected.
3. If the printer is not currently busy printing another report, a screen with the following options will be avail-
able. If the printer is busy, a message will display. You can press 1 to cancel the current print job. These
options will then display.
# Pound (or number) key on the telephone
* Star key on the telephone
, Comma (character for 2-second pause)
1= Event Logging Enables event logging, which causes the printer to continuously print events as they occur. The
date/time will print in 24-hour military format. Once event logging is enabled, it will remain enabled
until canceled by the installer. If you need to disable event logging, return to this option and press
1 to disable.
Sample Event Log
2 = Print Event History Prints the up-to-1000 events currently stored in the panel’s event history buffer. Events print
starting with the newest. The date and time printed will be when the event actually occurred and
will print in 24-hour military format.
EVENT LOG:
EVENT LOG:
STARTED: 02/17/97 02:23
STOPPED: 02/17/97 15:02
02/17/97 11:23 Event: System Silenced
02/17/97 11:24 Event: System Reset
02/17/97 14:30 Event: Local Programming Begin
02/17/97 15:01 Event: Local Programming Ended Successfully