User Manual

Programming 151274-L8
7-2
7.2.1 Edit Modules
The features that can be edited when this option is selected are, module name, and class of wiring (Class A or
Class B).
To edit an existing module, follow these steps:
1. Enter the installer code.
2. Select 7 for Program Menu.
3. Press 1 to enter module menu.
4. Press 1 to edit a module.
5. Use the or arrow to select the module you wish to edit.
7.2.1.1 Naming Modules
You can assign an English name to a system hardware module to make it easier to recognize on a display.
6. If you wish to edit the modules name press the or arrow to select each character for the modules
name (or press to bypass name edit).
Press the to move to the next character.
Figure 7-1 Edit module Name Programming Screen Example
7.2.1.2 Module, Wiring Class
This option applies only to the SLC loop. Each module has a unique set of option that specifically applies to the
functionality of the module being edited.
7. Choose the class of wiring you wish to use for this module by pressing the or arrow, then press
ENTER.
7.2.2 Adding a Module
If you need to add a new hardware module to the system, follow these steps.
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1. Enter the installer code.