- Silex Technology Embedded Intelligent Module Developer's Reference Guide

Configuring the SX-560
Silex
Page 21
Part Number 140-00192-100
Initial Wireless Setup procedure described previously in this chapter, or the internal command
console.
• Internal Web Pages (HTTP). You can use any standard web browser to access the SX-560
internal web pages. These web pages provide an easy-to-use graphical interface for configuring
the SX-560. In order to use the internal web pages for the first time, you must assign the SX-560
IP address and wireless network settings using some other method (for example, the Initial
Wireless Setup procedure described previously in this chapter, or the internal command console).
This initial IP address assignment need only be done one time.
• Internal Command Console. The internal command console provides a sophisticated command
line interface for advanced users to configure the SX-560. It can be accessed by connecting a
serial cable to serial port 2 or serial port 3 (serial port 1 can also be used to access the internal
command console by sending the AT#C command or defining a console mode string as
described in Chapters 4 and 6). Once the IP address and wireless network settings have been
configured, the internal command console can also be accessed via TELNET, or via ExtendView
and the internal web pages.
Configuring the SX-560 using each of the above methods is described in the following sections of this
chapter.