- Silex Technology Embedded Intelligent Module Developer's Reference Guide

Advanced Configuration
Silex
Page 45
Part Number 140-00192-100
Chapter 6
Advanced Configuration
The SX-560 module is equipped with a default configuration that works with most serial-to-Ethernet
connections. You can modify the settings to suit your installation requirements.
The web browser interface is the recommended method for setting advanced configuration parameters
(some of the advanced configuration parameters are not accessible via ExtendView). However,
regardless of the method to access the configuration parameters, the method for modifying the
parameters is virtually identical.
Factory Default Settings
Table 17 displays the configuration parameter descriptions and settings with the default settings indicated
in a separate column.
Table 17 Factory Default Settings
Parameter
Description
Settings
Default Setting
Character
Bits per character
7, 8
8
Flow
Flow control
None, Xon, Xoff,
CTS/RTS
None
Parity
Parity
None, Even, Odd,
Mark, Space
None
Speed
Baud rate of bits per second
300, 600,1200, 2400,
3600, 4800, 7200,
9600, 14400,19200,
38400, 57600, 76800,
115200, 230400,
460800, 921600
115200
Stop
Stop bits per character
1, 2
1
Mode
Line mode or serial port protocol
232, Disabled
232
Ecable
ECable mode for TCP connections
Enable, Disable
Disable
Ecaddr
ECable destination IP address
Set by user
N/A