- Silex Technology Embedded Intelligent Module Developer's Reference Guide

Page 82
Silex
Console Commands
Part Number 140-00192-100
Command
Description
SET SERVI <service
name> FMS
Sets filter 1 text replacement match string index.
If the index is zero, the default string of <LF> (line feed) is used.
The default value is 0.
Format:
SET SERVI <service name> FRM nn
SET SERVI <service
name> FRS
Sets filter 1 text replacement replace string index.
If the index is zero, the default string of <CRLF> (carriage return-line feed) is
used.
The default value is 0.
Format:
SET SERVI <service name> FRS nn
SET SERVI <service
name> IP
Enables or disables IP based jobs such as lpd, raw tcp and ftp, on the service
The default value is enabled for service 1 and 2, disabled for all others.
Format:
SET SERVI <service name> IP [ENable | DIsable]
SET SERVI <service
name> NAme
Changes service name
The default value varies by service
Format:
SET SERVI <service name> NAme <newname>
SET SERVI <service
name> POrt
Sets output port associated with a service
The default value is S1.
Format:
SET SERVI <service name> POrt <portname>
SET SERVI <service
name> PRIority
Sets priority for service for multiple service transmissions simultaneously
The default value is 10.
Format:
SET SERVI <service name> PRIority nn
SH SERVI PRI
[service_num]
Shows priority of service.
If service_num is not provided, the priority of all services is listed.
SET SERVI <service
name> RECeive
Sets receive only mode for a service
This option is required only for host applications that do not operate properly
if data is received from the serial device.
The default value is disabled.
Sample output:
SET SERVI <service name> RECeive [ENable |
DIsable]