- Silex Technology Embedded Intelligent Module Developer's Reference Guide

Page 86
Silex
Console Commands
Part Number 140-00192-100
Command
Description
Format:
SET IP FTIme [ENable | DIsable]
SET IP FTP
Enables or disables FTP protocol
The default value is Enable.
Format:
SET IP FTP [ENable | DIsable]
SET IP HTTP
Enables or disables HTTP protocol
The default value is Enable.
Format:
SET IP HTTP [ENable | DIsable]
SET IP
KEepalive*
Sets interval in minutes for sending TCP keepalive packets on a connection
The default value is 5 minutes.
Format:
SET IP KEepalive n
SET IP LPD
Enables or disables the LPD protocol
The default value is Enable.
Format:
SET IP LPD [ENable | DIsable]
SET IP MEthod
Sets method of getting IP address
The default value is Auto.
Format:
SET IP MEthod [ AUTO | DHCP | STATIC ]
SET IP REtry
Enables or disables LPD retry on incomplete job
The default value is Disable.
Format:
SET IP REtry [ENable | DIsable]
SET IP ROuter
Sets default router address
The default value is 0.0.0.0.
Format:
SET IP ROuter aa.bb.cc.dd
SET IP SUbnet
Sets IP subnet mask
The default value is 0.0.0.0.
Format:
SET IP SUbnet aa.bb.cc.dd
SET IP TCP
Enables or disables the raw TCP 9100 protocol
The default value is Enable.
Format: