- Silex Technology Mini Print Server User's Manual

10-7FAQ

Users Manual SX

When the PC and PRICOM are not on the same segment, a subnet mask and gateway

address must be configured on PRICOM. Use AdminManager or PRICOM web page to

verify that subnet mask and gateway address are correctly configured.

If DHCP/BOOTP server or RARP server resides on the network, the IP addresses are

assigned automatically, which may rewrite the IP address that you have manually

assigned to PRICOM. To avoid this problem, uncheck Use DHCP/BOOTP check box

and configure the IP address again.

Error during printing

Dial-up connection box appears when printing job is executed.

If you try to print while other users are printing large data (e.g. many pages or color

pages with high resolution), the printer is unable to accept your print job until the

ongoing print is finished. If the waiting time of your print job exceeds a certain limit,

a time out occurs, which causes the error message. In such case, execute the

print job again afterwards.

Printing will be complete after you cancel this dial box to shift the process to LAN adapter

from the dial-up adapter. This problem is caused due to Windows specifications.

CHECK1

CHECK2

CHECK