- Silex Technology Mini Print Server User's Manual

6Appendix
Users Manual SX
This section explains the configuration settings for a PRIOCM SX-300U.
Configuration Settings
General Setup
Tab
Factory
Default
-
-
DISABLE
AUTO
Expla nation
Please enter the password in ASCII TEXT (up to seven
(7) character). This password will be used for
configuration changes via AdminManager, Telnet and
Web page.
The input screen for root password opens.
Item
Root Password
General
Please select whether you want to use HEWLETT
PACKARD's JetAdmin/WebJetAdmin.
Please select the network speed. It is recommended to
select "AUTO". If you select "AUTO", the network speed
will be detected automatically. If the HUB did not link
when you switched on your print server (you can check
the HUB's LINK LED), please set the different network
speed manually.
Change Root
Password
Use HP JetAdmin
LAN Interface