- Silex Technology Mini Print Server User's Manual

5-4Using PRICOM in UNIX/Linux Environment
Users Manual SX
Register the combination of IP address and Ethernet address on ARP table and execute
PING.
- IP address configured in this method is temporary and will not be registered to PRICOM.
Be sure to register IP address by TELNET or utility.
Example: Ethernet address is “00809200110f”, IP address is “192.168.10.100” and host name
is “pbox”.
1. Switch on PRICOM.
2. Register the combination of IP address and Ethernet address on the ARP table by
using ARP command.
arp -s 192.168.10.100 00:80:92:00:11:0f temp
3. Command PING.
ping 192.168.10.100
4. If you get reply from PRICOM, configuration is complete.
192.168.10.100 is alive.
TIP
Configuring IP Address by ARP