- Silex Technology Mini Print Server User's Manual

6-1Using PRICOM in NetWare

Users Manual SX

This chapter explains how to configure PRICOM and NetWare server to print from a NetWare

environment.

-For how to connect to PRICOM to printer, Refer to chapter 2.

-Make sure the Novell client software has already been installed on the client and

NetWare server is on the network.

-Make sure to install printer driver before you start using PRICOM.

-NetWare server can be configured by either silex configuration utility (Quick Setup or

AdminManager) or Novell utility, PCONSOLE.

-When configuring by AdminManager, refer to Chapter 8.

In case of initial installation and printing In case of printing

(Administrator) (Client)

Configure printer port

Configure using Quick Setup

Configure printer port

NOTE

TIP

6. Using PRICOM in NetWare