Product specifications

Page 12
Silex
Configuring the Serial Device Server
Part Number 140-00188-180
8. You do not need to change any of the settings
in this window. Click the Serial Settings
button to configure the serial port.
9. Configure the serial port settings so that they
match the settings on your device. For
example, if your device is set for 9600bps,
odd parity, and XON/XOFF flow control, you
must change the settings on the Serial Device
Server to these settings.
If are using either RS-422 or RS-485 (SX-510
only), select 422 or 485 as the Mode. Select
Half as the Duplex type if you are using RS-
485 half-duplex.
Click OK when you are finished to return to
the Server Configuration window and then
click OK again.
10. Click OK to save your changes and reset the
Serial Device Server. If you are configuring a
Serial Device Server wireless model, unplug
the Ethernet cable. You can now use the
Serial Device Server on your network. You
may skip the remaining sections of this
chapter, although this information is useful for
future reference.