Product specifications

Configuring the Serial Device Server
Silex
Page 15
Part Number 140-00188-180
Using a Web Browser to Configure the Serial Device Server
After you have entered an IP address into the Serial Device Server, you can use any standard web
browser to access the internal web pages for configuring the Serial Device Server. Simply specify the IP
address of the Serial Device Server in your browser and then follow the steps below:
1. When you have connected to the Serial
Device Server, you will get the Server Info
page. Click Login on the left side of the
screen.
2. Enter the password access and press
Submit.
3. You will return to the Server Info page, but
new options will be listed on the left side of
the screen. Click on TCP/IP.
IMPORTANT: You must click the Submit button when you have finished configuring an internal web page. If you do not do
this, your changes will not be saved.
You may skip this section if you have completely configured the SX-500 using ExtendView. However, if you have advanced
configuration requirements, such as 802.1X EAP configuration, then you may need to use the internal web pages as
described in this section because ExtendView does not support these capabilities.