Product specifications

Advanced Configuration
Silex
Page 31
Part Number 140-00188-180
Figure 5 SNMP Configuration
8. Click the Submit button to save the changes. You must then restart the Serial Device Server to
make the changes take effect.
Configuring Serial Port Monitor Alert and Trap Configuration
The Serial Device Server can be configured to scan and compare the data received on the serial port to
user-defined strings. A match with a string can be a source for SNMP traps and/or email alerts.
The match strings and corresponding email or web page message strings are configured from the Internal
Configuration Console interface (accessible via TELNET).
Table 7 describes the Monitor Alert and Trap Configuration Commands.
Table 7 Port Monitor Alert Commands
Command
Description
SHOW PORT S1 TRIGMON
Shows strings and index numbers being monitored
SET PORT S1 TRIGMON <trig #> <string>
Assigns a string to be monitored on the serial port
Example:
Local> show port s1 trigmon
Index # Monitor String
------ --------------
Local> set port s1 trigmon 0 trigger on seeing this string
Local> show port s1 trigmon
Index # Monitor String
------ --------------
0: trigger on seeing this string
SHOW PORT S1 TRIGXMT
Shows email or web page strings associated with
TRIGMON index numbers
SET PORT S1 TRIGXMT <index #> <string>
Index # = 0 to 7
Assigns email or web page string to specified
TRIGMON index number
Example: