Product specifications

Advanced Security Configuration
Silex
Page 41
Part Number 140-00188-180
Appendix A
Advanced Security Configuration
There are numerous possible security settings. It is therefore important that you verify the appropriate
settings with your network administrator. If you enter the settings incorrectly, the Serial Device Server will
not be able to communicate on your network. The following table summarizes the wireless settings
required for each encryption mode and authentication type:
Authentication Type
Open
System
Shared-
Key
PSK
802.1x
TTLS
LEAP
PEAP
TLS
EAP-
FAST
Encryption Mode
Disable
(OK)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
64-Bit
WEP
1
1
N/A
N/A
N/A
N/A
N/A
N/A
128-Bit
WEP
1
1
N/A
N/A
N/A
N/A
N/A
N/A
WPA
N/A
N/A
2, 3
4, 7
4
4, 5
4, 5, 6
4
WPA2
N/A
N/A
2, 3
4, 7
4
4, 5
4, 5, 6
4
WPA2-
WPA
N/A
N/A
2, 3
4, 7
4
4, 5
4, 5, 6
4
Dynamic
WEP
N/A
N/A
N/A
4, 7
4
4, 5
4, 5, 6
4
Wired
Ethernet
Network
N/A
N/A
N/A
4, 7
N/A
4, 5
N/A
4
Basic Configuration
Parameters
802.1X Configuration
Parameters
1. 64/128Bit WEP Key
4. User ID and Password
2. WPA-PSK
5. Authentication Server Certificate
3. WPA Group Key
6. Private Key
7. Authentication Protocol
To use the above table, select the encryption mode and authentication type you are using. For example,
if you are using WPA2 with PSK authentication, you would need to set the WPA-PSK pre-shared key and
enable or disable the WPA Group Key. Likewise, if you are using WPA2 with 802.1X TLS authentication,
you would need to enter a User ID and Password, an Authentication Certificate, and a Private Key.