Product specifications

Console Commands
Silex
Page 47
Part Number 140-00188-180
Command
Description
SET NW KEY#
Selects the WLAN WEP key entry (the WEP key that will be used as the transmit
key)
The possible values are 1, 2, 3, or 4; the default value is 1.
Format:
SET NW KEY# n
SET NW KEYVAL
Sets the WLAN WEP key entry to the specified hex value
For WEP128, the key is 10 hex characters long; for WEP128, the key is 26 hex
characters long; the default value is null.
Format:
SET NW KEYVAL <key>
SET NW MOde
Sets WLAN mode
The possible modes are Infrastructure and Ad-Hoc; the default value is Ad-Hoc
Format:
SET NW MOde <mode>
SH NW MODE
Shows wireless operating mode
Sample output:
Wifi mode = AD-HOC (802.11)
SH NW RADio
Shows the selected radio mode of operation
Sample output:
Radio mode is 802.11b-g
SET NW SPeed
Sets maximum WLAN speed
Possible values are 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, and 1; the default value
is 54.
Format:
SET NW SPeed n
SH NW SPEED
Show the maximum wireless data speed in megabits per second
Sample output:
Speed = 54
SET NW SSid
Sets WLAN SSID
The default value is serserv.
Format:
SET NW SSid <name>
CL NW SSid
Clears SSID value and allows the server to connect to any AP.
Format:
CL NW SSid
SET NW BSsid
Sets WLAN BSSID to connect to a specific access point’s mac address
Format:
SET NW BSsid <value>
CL NW BSsid
Clears BSSID value and allows the server to use SSID, not a specific AP
Format:
CL NW BSsid