Product specifications

Page 50
Silex
Console Commands
Part Number 140-00188-180
Command
Description
SH NW REALM
Shows the realm associated with the authentication ID, if applicable.
The default value is null (blank) string.
The deprecated command SH NW TTRE also returns this data.
Sample output:
Somewhere
SET NW
WPAGROUP
Enable or disable WPA group key mode.
If enabled, group keys can be used for data link encryption.
The default value is disabled.
Sample output:
SET NW WPAGROUP [ENABLE | DISABLE]
SH NW
WPAAUTO
Shows state of WPA auto connect flag
Sample output:
WPA-AUTO Enabled
SH NW
WPAGROUP
Shows state of the allow WPA group keys flag
Sample output:
WPA-GROUP Disabled.
SET NW
WPAPSK
Sets WPA PSK pass phrase or hex key.
This value is only used if the authentication mode is WPA-PSK or WPA2-PSK. The
argument to this command is either a pass phrase of 8 to 63 characters or exactly
64 hex characters representing the 256 bit PSK value.
Format:
SET NW WPAPSK <key>
SET NW
WPATRACE
Sets WPA trace level.
This command is for diagnostic purposes only.
The default value is 0 or disabled.
Format:
SET NW WPATRACE nn
SH NW DISCONN
Displays the current value of the network disconnection timer
Sample output:
Disconnect Timer: 5
SET NW
DISCONN
Sets the period of the network link disconnection watchdog timer. In wireless
infrastructure mode, this timer monitors the wireless link, and if the unit is not
connected to an AP for the time specified, the unit is reset.
SET NW DISCONN nn
N = 0 watchdog timer is disabled
1-255 watchdog timer period in minutes
The factory default value is 5 minutes.
This timer also controls a receive activity monitor when the wireless network link is
connected. If no packets are received during the time specified, and the link
remains up, the unit will reset at the end of the time period.