Product specifications

Console Commands
Silex
Page 53
Part Number 140-00188-180
Command
Description
SH SERVEr
Shows server parameters
Sample output:
Serial Server Serial # 9047595
Address: 00-40-17-8A-0E-2B Name: TWC_8A0E2B
Number: 0
Identification: Network Server
Enabled Characteristics:
Link DOWN
SH SERVEr CO
Shows server network statistics
Sample output:
Seconds Since Zeroed: 163
Bytes Received:72950
Bytes Sent:18726
Frames Received:752
Frames Sent: 181
Multicast Bytes Rcv'd:64474
Multicast Bytes Sent: 2406
Multicast Frames Rcv'd:626
Multicast Frames Sent:11
Frames Sent, Deferred:2014
Frames Sent,1 Collision: 26
Frames Sent, 2+Collision: 5
Send Failures: 0
Send Failure Reasons: 0
Receive Failures: 503
Receive Failure Reasons: 1
Unrecognized Destination: 0
Data Overrun: 0
User Buffer Unavailable:0
System Buffer Unavailable:1
SH SNMP
Shows state of SNMP protocol enable
Sample output:
SNMP is Enabled
SH VErsion
Shows firmware version of print server
Protocols supported: NetBIOS SNMP TCP/IP EMail DHCP
Sample output:
serial server
Firmware Ver. 4.19 (2004.10.31)
Boot Ver. 1.4
16Mbit Flash
Zero
Clears and resets the network statistic counters
Service Commands
Table 17 Service Commands
Command
Description
SET SERVI <service
name> BOT
Sets beginning of transmission (BOT) string index for service
The SH SERVI STRings command displays the available strings and their
associated number; the default value is 1.
Format:
SET SERVI <service name> BOT nn
SET SERVI <service
name> EOT
Sets end of transmission (EOT) string index for service
The SH SERVI STRings command displays the available strings and their