Product specifications

Console Commands
Silex
Page 55
Part Number 140-00188-180
Command
Description
name> POrt
The default value is S1.
Format:
SET SERVI <service name> POrt <portname>
SET SERVI <service
name> PRIority
Sets priority for service for multiple service transmissions simultaneously
The default value is 10.
Format:
SET SERVI <service name> PRIority nn
SH SERVI PRI
[service_num]
Shows priority of service.
If service_num is not provided, the priority of all services is listed.
SET SERVI <service
name> RECeive
Sets receive only mode for a service
This option is required only for host applications that do not operate properly
if data is received from the serial device.
The default value is disabled.
Sample output:
SET SERVI <service name> RECeive [ENable |
DIsable]
SET SERVI <service
name> TCP
Sets raw TCP port for service
If port number is 0, raw TCP is disabled on service.
The default value is 9100 for service 1, 3001 for service 2.
Format:
SET SERVI <service name> TCP nn
SH SERVI SUMmary
[service_num]
Shows the basic parameters for a specific service. If service_num is not
provided, parameters for all services are displayed.
The command SH SERVI displays the same data as SHOW SERVI SUM.
String Commands
Table 18 String Commands
Command
Description
SET STRing
Set service string table entry
String 1 to11 cannot be set or changed.
Format:
SET STRing <string #> ”value”
CL STRing
Clears the service string table entry
Format:
CL STRing <string #>