Product specifications

Console Commands
Silex
Page 57
Part Number 140-00188-180
Command
Description
SET IP ADdress
Sets server IP address
The default value is 192.0.0.192
Format:
SET IP ADdress aa.bb.cc.dd
SET IP ARP
ENable
Enables or disables setting of IP address with an ARP packet
The default value is Enable.
Format:
SET ARP [ENable | DIsable]
SET IP BAnner
Enables or disables printing of job banner on LPD jobs
The default value is Disable.
Format:
SET IP BAnner [ENable | DIsable]
SET IP CHKSUM
Enables or disables verification of IP checksum on received packets
The default value is Enable.
Format:
SET IP CHKSUM [ENable | DIsable]
SET IP BOot
Sets number of tries for each enabled IP boot method, if not set to static
The default value is 3.
Format:
SET IP BOot n
SET IP ENable
Enables or disables all IP based protocols
The value is Enable.
Format:
SET IP [ENable | DIsable]
SET IP FTIme
Sets IP timeout
If enabled, the IP timeout is measured in seconds. If disable, the IP timeout is in
minutes.
The default value is Disable.
Format:
SET IP FTIme [ENable | DIsable]
SET IP FTP
Enables or disables FTP protocol
The default value is Enable.
Format:
SET IP FTP [ENable | DIsable]
SET IP HTTP
Enables or disables HTTP protocol
The default value is Enable.
Format:
SET IP HTTP [ENable | DIsable]
SET IP KEepalive
Sets interval in minutes for sending TCP keepalive packets on a connection
The default value is 5 minutes.
Format:
SET IP KEepalive n
SET IP LPD
Enables or disables the LPD protocol