Product specifications

Page 58
Silex
Console Commands
Part Number 140-00188-180
Command
Description
The default value is Enable.
Format:
SET IP LPD [ENable | DIsable]
SET IP MEthod
Sets method of getting IP address
The default value is Auto.
Format:
SET IP MEthod [ AUTO | BOOTP | RARP | DHCP | STATIC ]
SET IP PIng
Sends IP ping packets to test connection to remote host
Format:
SET IP PIng aa.bb.cc.dd
SET IP PRObe
Enables or disables TCP connection probes
The default value is Disable.
Format:
SET IP PRObe [ENable | DIsable]
SET IP RARp
Enables setting of default router and/or subnet mask based on RARP IP address set
The default value is 0.
Format:
SET IP RARp nn
nn: 0=both 1=no subnet, 2=no router, 3=neither
SET IP REtry
Enables or disables LPD retry on incomplete job
The default value is Disable.
Format:
SET IP REtry [ENable | DIsable]
SET IP ROuter
Sets default router address
The default value is 0.0.0.0.
Format:
SET IP ROuter aa.bb.cc.dd
SET IP SUbnet
Sets IP subnet mask
The default value is 0.0.0.0.
Format:
SET IP SUbnet aa.bb.cc.dd
SET IP TCP
Enables or disables the raw TCP 9100 protocol
The default value is Enable.
Format:
SET IP TCP [ENable | DIsable]