Product specifications

Page 68
Silex
Safety and Regulatory Notices
Part Number 140-00188-180
Declaration of Conformity (FCC) (SX-510)
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards
and Power Supplies used with Class B Personal Computers:
We: Silex Technology America, Inc.
Located at: 157 West 7065 South
Salt Lake City, UT 84047, USA
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of
the FCC rules as a Class B digital device FOR HOME OR OFFICE USE. Each product marketed, is
identical to the representative unit tested and found to be compliant with the standards. Records
maintained continue to reflect the equipment being produced can be expected to be within the variation
accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Trade Name: Silex
Type of Product: Ethernet and Wireless 802.11b/g and 802.11a-enabled serial server
Model: SX-510
Silex Technology America, Inc. hereby declares that the equipment specified above conforms to the
above requirements.
Information for Canadian Users (IC notice) (SX-510)
The term “IC” before the radio certification number only signifies that Industry of Canada technical
specifications were met. Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations (RSS-210).
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment that is installed outdoors is subject to
licensing.
This device has been designed to operate with an antenna having a maximum gain of 2 dB. Antenna
having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna
impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
than the equivalent isotropically radiated power (EIRP) is not more than the required for successful
communication.
The SX-510 complies with standards for the following countries:
USA:
 FCC Standard: Part 15, Subpart B, Subpart C and subpart E
 FCC ID: N6C-SX510
 Medical EMC: IEC 60601-1-2:2001
 Safety: UL 60950-1 (CSA Mark)
 SAR: ANSI/IEEE Std. C95.1-1999
 IP Rating: IP21
Canada: