User`s guide

5. Other Features
97
- The version of current rmware can be identied at the bottom left of the Web page.
5-8. WDS Feature
If this mode is used, two or more SX-AP-4800AN Access Points can communicate each
other. By linking several Access Points wirelessly, wireless distance can be expanded as well
as wireless dead spots can be eliminated. The connection and conguration methods to
use WDS are explained.
- Please check that all SX-AP-4800AN Access Points are running on the same version of rmware.
- To use this feature, the rmware version of SX-AP-4800AN must be Ver.2.1.0 or newer. If you
are using older version of the software, please install the newest one from our website at
http://www.silexamerica.com.
- In the following instructions, Internet Explorer 9 and Windows 7 are used as example.
Display may vary depending on the Web browser.
- We do not guarantee the WDS connection if wireless devices other than SX-AP-4800AN are
used.
SX-AP-4800AN
SX-AP-4800AN
SX-AP-4800AN
Extend the wireless distance
TIP
Note