User`s guide

108
SX-AP-4800AN User's Guide
2.
From the left menu in the Web page, click System.
3.
In the System Status page, check the WDS Information.
If Access Point MAC Address and Wireless Signal Strength(dBm) are displayed, the
WDS connection is established successfully.
To continue to see the connection status at the host AP, repeat the same process from
Step1-3 at the host AP's Web page.
- For details on each conguration item, refer to A. Appendix - A-1. List of All Settings.
- If Access Point MAC Address and Wireless Signal Strength (dBm) are not displayed, the WDS connection is not
established. In such a case, refer to 5-8 WDS Feature - What If WDS Connection Fails? for possible solutions.
- In the Web page of Root AP, Access Point MAC Address and Wireless Signal Strength (dBm) are not displayed.
WDS Connection Success:
WDS Connection Failure:
Note