User`s guide

5. Other Features
113
- For details on each conguration item, refer to A. Appendix - A-1. List of All Settings.
- If the settings are dierent between the host AP and client AP, change the settings of client AP to match
those of host AP. For how to change the settings, refer to 5-8 WDS Feature - WDS Conguration.
Setting Item
Wireless LAN Common Conguration Channel
Wireless LAN Conguration Interface
SSID
Network Authentication
Encryption Mode
WDS Information Wireless Interface
3.
In the System Status page, check that WDS Mode is set to Root AP or Repeater.
Check that status information as show in a table below are the same as those you
previously checked at the client AP.
From the left menu in the Web page, click Wireless LAN - Security.
- For details on each conguration item, refer to A. Appendix - A-1. List of All Settings.
- The client AP connects to the host AP using the "MAC Address used to connect to host AP in WDS" that you
have previously checked at the client AP. If access from the client AP is denied, change the setting to allow it.
4.
Select the wireless interface assigned for WDS connection and check that the MAC
Address lter is not set to block access from the client AP.
From the left menu in the Web page, click System.
Note
Note