User`s guide

122
SX-AP-4800AN User's Guide
Conditions to Use Fast Roaming Feature
To use fast roaming feature, the following conditions must be met when you connect SX-
AP-4800AN to network:
- Connect two or more SX-AP-4800AN Access Points to the same wired network.
- Select Wireless Interface 1 as wireless LAN for fast roaming.
- Use WPA2 as network authentication mode for Wireless Interface 1.
[WPA2 authentication mode]
- WPA2-PSK
- WPA2-Enterprise
- If dierent wireless settings are congured on Wireless Interface 1, please change it beforehand or change
it when you set fast roaming.
- Congure the same wireless settings on Wireless LAN 1 for all of the SX-AP-4800AN Access
Points when you use the fast roaming feature.
- When fast roaming is enabled, SX-AP-4800AN Access Points communicate with each other
to share information. Make sure access from each of the SX-AP-4800AN Access Points is not
being denied by checking the settings at MAC Address Filter Conguration in the Wired
LAN Conguration page.
SX-AP-4800AN SX-AP-4800AN SX-AP-4800AN
Wired LAN network
TIP
Note