User`s guide
5. Other Features
125
- For details on each conguration item, refer to A. Appendix - A-1. List of All Settings.
- Be sure to use WPA2 as network authentication when using fast roaming.
The sub-authentication modes, FT-PSK and FT-Enterprise can be used only when Network
Authentication mode is WPA2 (WPA2-PSK, WPA2-Enterprise).
- Up to 32 devices can be added as Access Points to share information of the connected stations.
- To add MAC Address, enter the MAC Address and click Add.
- To remove MAC Address, select the MAC Address and click Delete.
3.
4.
Select Wireless LAN 1 at Wireless Interface and select ENABLE for sub-authentication
mode (FT-PSK or FT-Enterprise) under Network Authentication.
In the 802.11r conguration area, add the MAC Address of the SX-AP-4800AN, that you wish to
use fast roaming feature with, to AP to Share Station Info. Make sure that you do NOT enter the
MAC Address of the SX-AP-4800AN you are currently using. Click Submit when you are nished.
Note
Note