User`s guide
8
SX-AP-4800AN User's Guide
2-2. Parts and Functions
The parts name and functions are as follows:
Front
③
④
⑤
⑥
①
②
⑦
⑧
(1)
Wireless LAN Antenna Wireless antenna for wireless communication
(2) Smart Wireless Setup
Switch (SET2)
When pressed together with the one on your wireless device while SX-AP-4800AN is
active, wireless conguration can be performed. (Smart Wireless Setup)
(3) Power LED
(Green/Orange/Red)
BLINK(Orange) Powering on
ON(Green) Ready
BLINK(Red) If blinks in Red, see the Notice When Using the Log Output.
OFF Powered o
(4) Mode LED
(Green/Orange/Red)
BLINK(Orange) Running in Conguration Mode
BLINK(Green) Smart Wireless Setup is in progress
ON(Green) Smart Wireless Setup is completed (* Turns o in 3 mins)
ON(Red) Smart Wireless Setup failed (* Turns o in 3 mins)
(5) WSTAT LED
(Green/Red)
BLINK(Green) Wireless data communication is active
BLINK(Red) DFS is running (Communication is disabled then)
(6) Band LED
(Green/Red)
ON(Green) Communicating in 2.4GHz band
ON(Red) Communicating in 5GHz band
OFF Wireless communication is disabled
(7) USB Port Connect a USB cable (A-type connector).
(8) Push Switch (SET1) Start in Conguration Mode Press and hold this switch for more than 3 sec while SX-
AP-4800AN is active.
Factory default conguration Press and hold this switch for more than 5 sec while
turning on SX-AP-4800AN.