User`s guide
A. Appendix
135
Wireless LAN - WEP Conguration
WEP
General Conguration
*
Detail Conguration
*
Details Enable/Disable WEP encryption.
If WEP encryption is used, wireless communication will be encrypted using the settings for "WEP Key
1-4" and "Key Index".
Range ON/OFF
Default Value OFF
Note If encryption is not enabled, data is not encrypted and is sent as is. To ensure higher security, enabling
encryption is recommended.
Key Index
General Conguration
*
Detail Conguration
*
Details Select the number of the WEP key to use for encryption (1-4).
This setting must be the same as that of your wireless devices.
Range 1 - 4
Default Value 1
WEP Key1-4
General Conguration
*
Detail Conguration
*
Details Set the WEP key for WEP encryption.
Up to 4 WEP keys can be set. This setting must be the same as that of your wireless devices. A WEP key
must be entered using hexadecimal or alphanumeric characters.
Range 5 or 13 characters
10 or 26 digit value
Default Value (None)
Note In most cases, alphanumeric characters are used.
Enter 5 characters if the key size is 64bit or 13 characters if the key size is 128bit.
For Hexadecimal, a value consists of numbers (0-9) and English letters (A-F). Enter a 10-digit value if the
key size is 64bit or a 26-digit value if the key size is 128bit.