User`s guide

136
SX-AP-4800AN User's Guide
Wireless LAN - WPA/WPA2 Conguration
Encryption Mode
General Conguration
*
Detail Conguration
*
Details Select the encryption mode to use for WPA-PSK, WPA2-PSK, WPA/WPA2-PSK, WPA-Enterprise,
WPA2-Enterprise, WPA/WPA2-Enterprise authentication.
Range TKIP/AES/AUTO
Default Value AES
Note When the network authentication mode is WPA2-PSK, WPA/WPA2-PSK, WPA2-Enterprise, WPA/
WPA2-Enterprise, TKIP and AUTO cannot be used.
* The max number of connectable station devices will dier depending on the encryption mode used.
- When using AES only: 100 units
- When using TKIP or AUTO: 50 units
* In Multi SSID environment, the number of connected devices will be the total number of devices
connected on all wireless interfaces. Thus, the max number of connectable devices will dier
depending on the encryption mode used on each interface.
- When all wireless interfaces use AES only: 100 units
- When one or some of the wireless interfaces use TKIP or AUTO: 50 units
* When using the WDS feature, the Repeater AP connected to SX-AP-4800AN as client AP will consume
one connection, while Root AP or Repeater APs connected to SX-AP-4800AN as host AP will NOT
consume any connections.
Pre-Shared Key
General Conguration
*
Detail Conguration
*
Details Set the Pre-Shared Key to use for TKIP/AES encryption.
The Pre-Shared Key is a keyword used to create the encryption key. It is also referred to as ' network key
' or ' password '.
Range 8-63 alphanumeric characters
64 hexadecimal value
Default Value Wireless LAN1: xxxxxxxx
Wireless LAN2-4: xxxxxxxx_y
(xxxxxxxx is the sequence of numbers generated by a particular rule based on the Ethernet Address,
while y indicates a number of the wireless interface.)
* The default value can be found on the product label (see the bottom of the unit).
Note In most case, alphanumeric characters are used (8-63 characters).
For Hexadecimal, a value consists of numbers (0-9) and English letters (A-F).
* This setting must be the same as that of your wireless devices.
Group key renew interval
General Conguration
*
Detail Conguration
*
Details Set the refresh interval for Pre-Shared Key (min).
If 0 is set, this setting is disabled.
Range 0 - 1440
Default Value 60