User`s guide
A. Appendix
139
Wireless LAN - Extension Conguration
Beacon Interval(msec)
General Conguration
-
Detail Conguration
*
Details Set the beacon transmission interval (millsec).
Range 20 - 1000
Default Value 100
DTIM
General Conguration
-
Detail Conguration
*
Details Set the DTIM interval for a wireless LAN.
Range 1 - 255
Default Value 1
Transmit Power(%)
General Conguration
-
Detail Conguration
*
Details Set the transmission strength level.
When a lower strength level is selected, the radio transmission distance is shortened and the scope of
search for SX-AP-4800AN will be narrowed down. By narrowing down the scope of search, the risk of
interference to the other wireless networks could be reduced.
Range 5 - 100
Default Value 100
RTS Threshold
General Conguration
-
Detail Conguration
*
Details Set the RTS threshold value.
Range 1 - 2346
Default Value 2346
Wireless LAN - MAC Address Filter Conguration
Filter Type
General Conguration
-
Detail Conguration
*
Details Set a security type for MAC Address ltering used over a wireless LAN.
Range DISABLE/DENY/ALLOW
Default Value DISABLE
Note When the Smart Wireless Setup is set to ENABLE, MAC Address ltering will not function. To use MAC
Address ltering, disable the Smart Wireless Setup or use the wireless interface which does not use MAC
Address ltering for the Smart Wireless Setup.
MAC Address
General Conguration
-
Detail Conguration
*
Details Set the MAC Address lter for a wireless LAN.
By registering the MAC Address lter, access via a wireless LAN can be controlled.
Range 00:00:00:00:00:01 - FF:FF:FF:FF:FF:FE
Default Value 00:00:00:00:00:00
Note If a lter type is DISABLE, access from all wireless stations is allowed.
If a lter type is DENY, access from the wireless stations registered to MAC Address lter list is denied.
If a lter type is ALLOW, only access from the wireless stations registered to MAC Address lter list is
allowed.