User`s guide

A. Appendix
147
DHCP Server Conguration
DHCP Server Function
General Conguration
-
Detail Conguration
*
Details Enable/Disable the DHCP server function.
Select ENABLE to run SX-AP-4800AN as a DHCP server to automatically assign an IP address to the PC.
Select DISABLE if you already have a DHCP server on the network.
Range ENABLE/DISABLE
Default Value DISABLE
Start IP Address
General Conguration
-
Detail Conguration
*
Details Set the start IP address used for DHCP server function to assign the address.
The value must be 4 numbers separated by dots and expressed in the format [xxx.xxx.xxx.xxx].
Range 0.0.0.0 - 255.255.255.255
Default Value 0.0.0.0
End IP Address
General Conguration
-
Detail Conguration
*
Details Set the end IP address used for DHCP server function to assign the address.
The value must be 4 numbers separated by dots and expressed in the format [xxx.xxx.xxx.xxx].
Range 0.0.0.0 - 255.255.255.255
Default Value 0.0.0.0
Subnet Mask
General Conguration
-
Detail Conguration
*
Details Set the subnet mask for IP addresses to be assigned.
The value must be 4 numbers separated by dots and expressed in the format [xxx.xxx.xxx.xxx].
Range 0.0.0.0 - 255.255.255.255
Default Value 0.0.0.0
Note When set to "0.0.0.0", this setting is disabled and a subnet mask appropriate for the start IP address is
automatically used.
Default Gateway
General Conguration
-
Detail Conguration
*
Details Set the gateway address.
The value must be 4 numbers separated by dots and expressed in the format [xxx.xxx.xxx.xxx].
Range 0.0.0.0 - 255.255.255.255
Default Value 0.0.0.0
Note When set to "0.0.0.0", this setting is disabled and default gateway address is not assigned by DHCP.
Lease Time
General Conguration
-
Detail Conguration
*
Details Set the lease time.
If this is set to 0 days + 0 hours + 0 mins, the lease period will be 10 days.
Range 0 days 0 hours 0 mins - 44 days 23 hours 59 mins
Default Value 0 days 0 hours 0 mins